ODM Stainless Steel CF8m Wcb SS304 316 Low Temperature Flanged Pressure Relief Gate Check Butterfly Globe Control Safety Floating Industrial Ball Valve

Product Description

YOONAD Valve offers customized services for all valve series, such as ball valve, globe valve, check valve, gate valve, butterfly valve, safety valve, control valve, etc.

The following is the detailed description of ball valve. If you have any need about other valves, please check the home page of YOONAD Valve and feel free to contact me anytime.

The most common types of manual ball valves are the 1-Piece, 2-Piece and 3-Piece. Another relatively common type is the 3-way ball valve, these 4 types account for the vast majority of the most often used valves.

One Piece

A One-Piece has valve body cast out of a single piece of material. This means that there no joints in the body which eliminates the risk of leaks. The one-piece has a smaller body than the other valves making it the most cost effective. This also results in a smaller ball which means one-piece valves always have a reduced port. This means the internal diameter of the pipe decreases by one size at the point where the valve is installed. they are generally used where cleaning is not a concern and where the possibility of particle build up is low.

Two Piece

A Two-Piece has a valve body cast out of two pieces that thread together. The two-piece has a larger body which allows for a larger ball which means a full port is possible. This means the internal diameter of pipe the remains constant throughout the pipe, once the valve is installed. They are the most commonly used among all the ball valve types and are good for mixtures and applications where an optimal flow rate is preferred. The Valve body can be dismantled for cleaning and to service the seals, however the valve will have to be removed from the pipe, unlike the three piece.

Three Piece

A Three-Piece has valve body cast out of three pieces that are held together by bolt connections fitted to each of the two ends. The three-piece also has a larger body which allows for a larger ball with a full port. They are ideal for applications where regular maintenance and cleaning is required. By loosening the bolt connections the valve separates into three parts and the internal ball and seats can be accessed without removing the two ends connected to the pipe. This makes them ideal for food & beverage applications and in pharmaceutical industries where sanitation and regular cleaning is required.

Three Way

These mulit-port valves are used in mixing or splitting flow (T-Port) and also for diverting (L-Port) multiple streams of fluid. This is achieved by means of a L-shaped or T-shaped bore in the ball. On top of this they also open and close the flow to multiple fluid streams. There are two types of 3-way ball valves L-Port and T-Port:

• L-Port
• Used as diverter valves directing flow from a single inlet to one of two outlets.
• Also used as selector valves selecting one of two inlets to flow to a single outlet.

• T-Port
•  Used as mixing valves combining flow from two inlets into a single outlet.
• Also used for splitting flow from a single inlet to two outlets simultaneously.

 

• Pressure rating up to 6000 psig (413 Bar) at 70ºF (21ºC) with PCTFE seats
• Temperature rating from -65ºF to 350ºF (-54ºC to 177ºC) with standard PCTFE seat
• Compact design
• Straight through design for max. flow rate
• Body materials available in 316 stainless steel and brass
• 100% factory tested

The ball valve operates by rotating the ball 90 degrees using a handle or actuator, which changes the alignment of the hole or passage. When the hole aligns with the inlet and outlet ports, the valve is open, allowing the fluid or gas to flow through. When the hole is perpendicular to the ports, the valve is closed, stopping the flow.

High pressure industrial ball valves are specifically designed to withstand and regulate the flow of fluids or gases under high pressure conditions, typically ranging from a few hundred to several thousand pounds per square inch (psi). These valves are constructed using robust materials such as stainless steel, carbon steel, or other alloys that can handle the high pressures without leaking or failing.

They are commonly used in various industries such as oil and gas, petrochemical, power generation, chemical processing, and water treatment, where reliable control of high-pressure fluids or gases is required. High pressure ball valves offer several advantages, including quick and easy operation, excellent sealing capabilities, minimal pressure drop, and durability in demanding environments.

Technical Specification

1. Design & Manufacture standard:  GB/T-12237
2. Pressure & Temperature standard: GB/T13927-2008

3. Face-to-face dimension standard: GB/T-12221,JB/T-1686

4. Flange standard:  GB/T-2592,JB/T-79.15. Test & Inspect stand: GB/T-13927,JB/T-9092

Main Part & Materials

Part Names	Part Materials
Body	WCB/A105	LCB/LF2	WC6/F22	CF8/F304	CF8M/F316	CF3/F304L	CF3M/F316L
Bonnet	WCB/A105	LCB/LF2	WC6/F22	CF8/F304	CF8M/F316	CF3/F304L	CF3M/F316L
Ball	A105+ENP	SS304	F22	SS304	SS316	SS304L	SS316L
Stem	A105	F304	F6a	F304	F316	F304L	F316L
Seat/Seat Ring	PTFE/RPTFE/NYLON/DEVLON/PEEK or METAL
Packing	Graphite/PTFE
Gasket	SS304+Graphite/SS304+Graphite
Bolts/Nuts	B7/2H	L7/4	B16/4	B8/8	B8M/8M	B8/8	B8M/8M
Suitable Medium	W.O.G etc.			HNO3, CH3OOH etc.
Suitable Temperature	-29~425 °C	-46~340 °C	-46~340 °C	-196~427 °C	-196~427 °C	-196~427 °C	-196~427 °C

Main External Dimensions

Size	in	2	2 1/2	3	4	6	8	10	12	14	16	18	20	24	26	28	30	32	36
	mm	50	65	80	100	150	200	250	300	350	400	450	500	600	650	700	750	800	900
L(RF)	in	7	7.5	8	9	15.5	18	21	24	27	30	34	36	42	45	49	51	54	60
	mm	178	190	203	229	394	457	533	610	686	762	864	914	1067	1143	1245	1295	1372	1524
L1(BW)	in	8.5	9.5	11.12	12	18	20.5	22	25	30	33	36	39	45	49	53	55	60	68
	mm	216	241	283	305	457	521	559	635	762	838	814	991	1143	1245	1346	1397	1524	1727
H	in	7	7.5	8.25	9.25	20.88	24.62	25.62	30.75	31	36.25	38.25	43.38	5.25	50.75	55.12	64.12	70.88	80.75
	mm	177	190	210	235	530	625	650	780	790	920	970	1100	1150	1290	1400	1630	1840	2050
W	in	14	16	20	20	24	24	24	24	32	32	32	32	32	32	32	32	32	32
	mm	350	400	500	500	600	600	600	600	800	800	800	800	800	800	800	800	800	800
WT(Kg)	RF	15	19	27	38	81	140	160	205	260	390	510	750	1200	1400	1860	2100	2530	2970
	BW	13.5	15.5	24.5	32.5	76	132	147	182	241	370	495	726	1125	1250	1640	1930	2390	2760